Power Off; Calibration - Returnstar Interactive Tech IQTouch HA1100 Pro User Manual

3.2 Power Off

Step 1: Press the power button
control to enter sleep mode.
Step 2: Long press the power button
control, The Warning dialog box will be displayed as shown in the following figure.
Step 3: In the Warning dialog box, tap Cancel to return to working mode. Tap Turn off to turn off
the panel, and the power indicator will turn to red.
Step 4: If you want to completely turn off the product, turn off the rocker switch behind the panel
(next to the power socket) and unplug the power cord.
If an OPS is installed, the OPS and the screen will simultaneously powered off when the power is
turned off.
Please properly shut down the panel before disconnecting the power source or it may cause

damage. Accidental power failure may cause damage to the panel.
Do not repeatedly turn the power on & off in a short period of time as it may cause

malfunction.

3.3 Calibration

If the cursor position has a big deviation from the actual touch point, calibration is used to eliminate
on the front panel or the power button
on the front panel or the power button
23
on the remote
on the remote