Table of Contents
Advertisement
Introduction
Proper vessel handling and installation are important to safe use and long vessel life.
These guidelines outlined herein should be carefully followed; however, they are
intended only as guidelines and do not relieve the purchaser from full responsibility for
proper inspection, handling and installation. Damage due to improper handling or
installation is the sole responsibility of the purchaser.
Improper assembly, misuse or corrosion damage can result in mechanical failure, property
damage and serious injury or death. Read and follow all instructions carefully. Pay
particular attention to the safety precautions given in this Installation Guide section.
Regardless of when and by whom your vessel may have been installed, there are a few
quick checks you should make before use. Check that each vessel is:
➢ Mounted with compliant material (Polyurethane Saddle) between the fiberglass shell and
any rigid frame.
➢ Free to expand under pressure – shell not clamped rigidly in place, no rigid piping
connection to port fittings.
➢ Not used in any way to support other vessels / objects.
SECTION 2 - INSTALLATION GUIDE
Page 30 of 38
Advertisement
Table of Contents
