Advertisement
3. Connect the ground cable: Determine whether the socket ground cable is routed in from
the top or bottom.
Step 3 applies to the scenarios where a 220 V or 110 V socket is installed. The following
figures use a 220 V socket as an example.
Scenario 1: Ground Cable Routed in from the Top of the Socket
One end of the cable (1761) has been connected to the ground. Remove the other
end of the cable from the rear panel and connect it to the ground point of the
socket.
Scenario 2: Ground Cable Routed in from the Bottom of the Socket
Connect one end of the cable (1762) to the ground point of the socket and the other
end to the reserved ground point on the rear panel.
18
Advertisement
