Scenario 2: The Lower Part of the Lock Tongue Interferes
With the Lower Surface of the Lock Base
Use leveling washers to raise ESS by 5–10 mm on the foundation under the lock base
farthest to the door hinge.
No.
Meaning
1
Position of leveling
washers
How Do I Ensure that the Solenoid Valve Is Not Activated
1. Check whether the solenoid valve is not activated.
2. If it is activated, reset it. The reset procedure is as follows:
a. Insert the reset device into the solenoid valve to reset the ejector pin.
b. After resetting, remove the solenoid valve reset device.
Activated
45
Not activated