Setting Up A Local Conference Call; Merging Two Calls Into A Conference; Muting/Unmuting A Conference Call; Splitting A Conference Call - Yealink W76P User Manual

Setting Up a Local Conference Call

You can set up a local conference call with up to two contacts.
1. Place a call to the first party.
2. When the first party answers the call, select Options > Conference.
The active call is placed on hold.
3. Dial the second party's number.
4. When the second party answers the call, select Conf. to invite two parties to join the
conference.

Merging Two Calls into a Conference

You can invite a held call into a conference call with the active call.
1. Place two calls on the phone.
2. Select Options > Conference.

Muting/Unmuting a Conference Call

When you mute the local microphone during a conference call, other participants can hear each
other except you.
1. Press the MUTE key to mute the conference.
2. Press the MUTE key again to unmute the conference

Splitting a Conference Call

You can split the conference call into individual calls. After the split, the conference call ends, and
other parties are held. Select Split.

Ending a Conference Call

You can end the current conference call at any time. Press

VOICE MAIL

Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail
messages on your IP phones.

Setting a Voice Mail Key for a Specific Line

You can set digit key 1 as a voice mail key for a specific line. When the handset is idle, you can long
press this key, and quickly access the voice mails without scrolling through the menu.
1. Go to OK > Voice Mail > Set Key 1.
2. Select the desired line, and then press Select.
or End.
21