Heater And Guard Install - Insignia MX1818 Series Installation Manual

Step 12 — Installing the heater and heater guard
Part 1: Locate the heater
backplate and screw into position
using the screws provided in the
heater box.
www.insigniashowers.com
Part 2: Connect the heater
hood by clipping it into the
heater. Take the heater and
locate it onto the backplate,
resting the bottom within
the grooves and securing it
in position with a screw
through a pre-made hole in
the hood.
Last Modified: 20/12/2023
Part 3: Take the heater
guard frame and place it
around the heater and
screw into position using
ST60 Screws.
17