Insignia MX1818 Series Installation Manual page 4

Electrical Requirements Model MX1818
Always consult a qualified Electrician before connection as to suitability Your electrical contractor
will understand ALL legal requirements of connection before undertaking any work or installation.
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF. ALWAYS USE AN
ELECTRICAL CONTRACTOR AND ENSURE LEGAL CERTIFICATION IS GIVEN ON
Note for electrician: This product comes with pre-fitted RCD unit. We leave it this way for you to connect it your
own way due to continued additions to current regulations.
1) Connect within current laws and IP directives. Subject to room location.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home computer. A
surge protector should eradicate the possibility of either the transformer or control panel being burnt out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative by law. Failure to
adhere to this will not only void your electrical warranty for your sauna, but could void your house insurance
Voltage Rating 380 volts with 220-240AC option
Frequency Rating 50Hz
Power Rating 6200 Watts
Total Amperage 25.9 Amps at 240V
COMPLETION
www.insigniashowers.com Last Modified: 20/12/2023
Tools Required
•
Scissors
•
Knife
•
Spirit Level
•
Tape Measure
•
Philips Screwdriver
•
Electric Drill
•
Safety Gloves
•
Safety Glasses
04