Process Fluid; System Pressure; Product Types - BRONKHORST IN-FLOW High Flow F-116AI Quick Start Manual

Process fluid

The product is intended for the use of the process fluid indicated on
the serial number label.
▶ Make sure that the process fluid used is identical to that
indicated on the serial number label.
In any other case:
▶ Refer to the online available comprehensive manual for
whether the required process fluid is suitable for the product
type and wetted materials used.
▶ If in any doubt: scan the QR code (Service & Support) on the
back cover to get in contact with Bronkhorst.
The user is responsible for taking the necessary safety measures
to prevent damage and/or injury while working with the product
and process fluid.
▶ Please refer to the on-site available material safety data sheet
of the process fluid (MSDS) before working on the product.

System pressure

The maximum permissible pressure is indicated in the technical
specifications table in this guide. Exceeding this value may result
in product damage or leakage.
▶ Make sure that the maximum permissible pressure of the
product is equal to or greater than the process conditions of
the system.

Product types

This document only applies to the product types indicated on the
front cover of this Quick Start Guide.
▶ Check whether this Quick Start Guide applies to the product.
About this Quick Start Guide
All illustrations are general representations and may
differ from the actual configuration and product type.
This Quick Start Guide is intended for commissioning the product
in a non-critical process. It will guide the user in controlling and
monitoring research and pilot setups using Bronkhorst FlowSuite
software.
▶ Prior to work, check whether a newer version of this document
is available on the Bronkhorst website.
▶ Scan the QR code (Product info) on the back cover to go the
product landing page to download the latest version.