Maintenance; Cleaning Exterior - BRONKHORST IN-FLOW High Flow F-116AI Quick Start Manual

Maintenance

Although no routine maintenance is required, to ensure that the
product works correctly and safely, a regular (visual) inspection is
recommended.
Check prior to each use
▶ Check cabling for proper connection, damage and wear.
▶ Check fluid lines and connections for leaks, damage and wear.
▶ Carry out repairs immediately.
Removing contamination
In case of clogging or contamination of the fluid path, purging the
product and fluid lines may solve the issue.
▶ Purge the fluid path with a clean, dry and inert gas.

Cleaning exterior

▶ Clean the product with a dry or slightly damp cloth.
▶ Avoid using abrasive or aggressive cleaning agents.
Technical specifications
Description
Maximum fluid pressure
Permissible fluid temp.
Permissible ambient temp.
Storage conditions
Max. install. altitude
Warm-up time
Ingress protection
Power input
Power connector
Process connections
Unit Value
bar(g) See serial number
label
°C (°F) -10 ... 70 (14 ... 158)
°C (°F) -10 ... 70 (14 ... 158)
°C (°F) 0 ... 50 (32 ... 122)
%RH 95 (non condensing)
m (ft) 2000 (6560)
min. 30
IP65
Vdc 15 ... 24 (±10 %)
8 DIN (male)
• Compression type
• Face seal couplings