Table of Contents
Advertisement
Maintenance
5.2.3 Removing DC SPD
1. Follow Section 5.1.1 to disconnect from Voltage Sources.
2. Follow Section 5.1.2 to open front door.
3. Press and remove the protective cover. (Figure 5-8)
4. Press to release the lock of the header then remove the sensing cable of DC
SPD. (Figure 5-9- ① )
5. Loose 18 screws to remove DC SPD. (Figure 5-9- ② )
Figure 5-8: Remove the protective cover
60
Advertisement
Chapters
Table of Contents
