DCS 9 Series User Manual page 39

Why isn't the rotisserie staying lit when I release the safety valve button?
Releasing button too soon. Keep pressing the safety valve button until the rotisserie burner
stays lit.
Why isn't the rotisserie rotating?
Motor is off. Check that motor is switched on and plugged into a GFI outlet.
z
Reset if tripped.
Rod not inserted correctly. Check the rod is inserted correctly in the motor and
z
balanced on the rollers at the side of grill. See 'Using the rotisserie'.
Something is blocking it. Check that trays and racks are not preventing rotisserie from
z
turning. Check food is tied correctly and is centered and balanced on the rod. If not,
switch motor off and turn burner to
Why aren't the hood lights or rotisserie light working?
Bulb has blown. Replace bulb. See 'Replacing the lights.'
z
No power. Check the power supply is on. Check power supply fuse, and replace if
z
blown. If problem persists, call Customer Care or your Authorized Service Center.
Why aren't the dial lights working?
No power. Check the power supply is on. Check power supply fuse. Replace if blown.
z
If problem persists, call Customer Care or your Authorized Service Center.
TROUBLESHOOTING
while you readjust the food.
LOW
39