Lincoln Electric LN-25 PRO DUAL POWER Service Manual page 17

A-9
CV Power Source with Twist-Mate Connectors and
no Remote/Local Switch. (See Figure A.9)
CV-250
CV-300
CV-305
Place CV/CC switch in the feeder in the "CV" position.
CV Power Source with 24 or 42 VAC
(See Figure A.10)
• Ranger 250
• Ranger 305
CV-Power Source
• Vantage 300
CV-305
• Vantage 400
CV-400
• Vantage 500
CV-655
DC-400
• SAE's Require
DC-655
K-385-2
V-350
V-450
• Classic's Require
Wire Feed Module
If present, place the power source Remote/Local
Switch in the Remote position.
Place CV/CC switch in the feeder in the "CV" position.
INSTALLATION
FIGURE A.9
Jump er
Electrode
Work
See Magnum Literature
FIGURE A.10
Control Cable
Electrode
Work
K#
K2614-1, -3
KP1695-XX
KP1696-XX
KP1697-XX
K1797-xx
K2335-1
See Magnum Literature
K852-95
LN-25™ PRO DUAL POWER
LN-25™ PRO
DUAL POWER
Wor k clip
K#
K2614-1, -3 LN-25™ PRO Dual Power
KP1695-XX
KP1696-XX
KP1697-XX
K1841-
K484
LN-25™ PRO
DUAL POWER
Description
LN-25™ PRO DUAL POWER
Drive Roll Kit
Control Cable
Adapter for Competitive Power Sources
Welding Gun
CV power source
Welding Cables
Twist-Mate Cable Plug
A-9
Description
Drive Roll Kit
Welding Gun
CV power Source
Welding Cables
Jumper Plug kit