Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Agora Models Manuals
  4. Toy
  5. OPTIMUS PRIME Pack 11
  6. Build instructions

Agora Models OPTIMUS PRIME Pack 11 Build Instructions

Hide thumbs

Advertisement

Quick Links

Download this manual
Pack 11
B U I L D
I N S T R U C T I O N S
ASSEMBLING THE FUEL TANKS ON TOP OF THE LEGS
ASSEMBLING THE LEFT-SIDE WHEELS
ASSEMBLING THE RIGHT-SIDE WHEELS
ASSEMBLING THE SPINE
ASSEMBLING THE BODY
ASSEMBLING THE REMOTE CONTROL FOR LIGHTS AND VOICE
TRANSFORMERS and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc. ©2024 Hasbro.

Advertisement

loading
Need help?

Need help?

Do you have a question about the OPTIMUS PRIME Pack 11 and is the answer not in the manual?

Questions and answers

Related Manuals for Agora Models OPTIMUS PRIME Pack 11

Summary of Contents for Agora Models OPTIMUS PRIME Pack 11

  • Page 1 Pack 11 B U I L D I N S T R U C T I O N S ASSEMBLING THE FUEL TANKS ON TOP OF THE LEGS ASSEMBLING THE LEFT-SIDE WHEELS ASSEMBLING THE RIGHT-SIDE WHEELS ASSEMBLING THE SPINE ASSEMBLING THE BODY ASSEMBLING THE REMOTE CONTROL FOR LIGHTS AND VOICE TRANSFORMERS and HASBRO and all related trademarks and logos are trademarks of Hasbro, Inc.
  • Page 2 Advice from the experts Please keep ALL unused screws as they may be required in a later stage. Please make sure you don’t mix up the screws. They look quite similar, but the threads do vary slightly. Using the wrong screws may damage the parts. When securing parts together using multiple screws, fit each screw loosely to ensure all the parts are correctly aligned before gently tightening them firmly, but not overtight, in the order in which you placed them.
  • Page 3 Pack 11 Parts T R A Y 1 S C R E W S M 3x8mm x16 PWB 2.3x6mm x3 TR-11-92 x4 PM 3x8mm x20 PB 2.3x6mm x34 TR-11-86 x11 PWM 2x6mm x11 PWB 2.6x8mm x5 TR-11-87 x7 PB 2.6x8mm x28 PWB 2.6x6mm x3 TR-11-88 x5 AGORAMODELS...
  • Page 4 Pack 11 Parts T R A Y 1 TR-11-20 TR-11-02 TR-11-05 TR-11-03 TR-11-22 TR-11-17 TR-11-16 TR-11-06 TR-11-10 TR-11-09 TR-11-76 TR-11-01 TR-11-19 TR-11-18 TR-11-12 TR-11-07 TR-11-21 TR-11-14 TR-11-15 TR-11-04 TR-11-13 TR-11-08 TR-11-11 AGORAMODELS OPTIMUS PRIME...
  • Page 5 Pack 11 Parts T R A Y 2 TR-11-32 TR-11-48 TR-11-50 TR-11-49 TR-11-36 TR-11-38 TR-11-44 TR-11-45 TR-11-29 TR-11-79 TR-11-91 TR-11-24 TR-11-51 TR-11-35 TR-11-39 TR-11-25 TR-11-27 TR-11-78 TR-11-28 TR-11-27 TR-11-75 TR-11-55 TR-11-46 TR-11-25 TR-11-77 TR-11-24 TR-11-26 TR-11-23 TR-11-26 TR-11-47 TR-11-41 TR-11-40 TR-11-33 TR-11-37 TR-11-31...
  • Page 6 Pack 11 Parts T R A Y 3 TR-11-71 TR-11-68 TR-11-70 TR-11-59 TR-11-62 TR-11-58 TR-11-69 TR-11-52 TR-11-53 TR-11-63 TR-11-57 TR-11-56 TR-11-65 TR-11-66 TR-11-64 TR-11-60 TR-11-72 TR-11-67 TR-11-73 TR-11-54 TR-11-61 TR-11-74 Most of the parts supplied in this tray are used to assemble the Matrix of Leadership and the blaster.
  • Page 7 Assembling the Fuel Tanks on the Top of the Legs S T E P 1 Push 2x TR-11-01 onto A as shown. Secure each part using 2x PB 2.6x8 mm screws. PB 2.6x8 TR-11-01 S T E P 2 Place TR-11-02 on top, securing them using 2x PB 2.6x8 mm screws on each side.
  • Page 8 Assembling the Fuel Tanks on the Top of the Legs TR-11-03 TR-11-04 TR-11-04 S T E P 3 Take 4x TR-11-04. Apply a little glue to the area shown in red (3a) and fix to TR-11-03. Make two of these. Part 1 x2 S T E P 4 Attach the Part 1...
  • Page 9 Assembling the Fuel Tanks on the Top of the Legs S T E P 5 Take 8x TR-11-76 and push them into place – 4x on each side. TR-11-76 S T E P 6 Push TR-11-05 and then TR-11-06 onto the ends of TR-11-76.
  • Page 10 Assembling the Fuel Tanks on the Top of the Legs TR-11-07 TR-11-07 S T E P 7 Secure parts in place using 1x PB 2.6x8 mm PB 2.6x8 screw on each side. Apply a little glue to 2x TR-11-07 (shown in red in 7a) before placing on top.
  • Page 11 Assembling the Left-side Wheels TR-11-22 TR-11-20 S T E P 9 Push the wheel TR-11-20 into the tyre TR-11-22. Make four of these. Note: Pay attention to the “AUTOBOT” logo which should face outwards. Part 3 x4 S T E P 1 0 Attach TR-11-14 to A as shown, then attach 2x Part 2 (Step...
  • Page 12 Assembling the Left-side Wheels S T E P 1 1 Place TR-11-92 as shown, then place 2x Part 3 wheels on top. TR-11-92 Part 3 TR-11-88 TR-11-21 TR-11-21 PWB 2.6x8 S T E P 1 2 Thread TR-11-88 onto a PWB 2.6x8 mm screw and use to fix a wheel in place. Repeat to fix the other wheel.
  • Page 13 Assembling the Right-side Wheels TR-11-19 TR-11-17 TR-11-19 S T E P 1 3 Apply glue to TR-11-19 and attach to TR-11-17, using the raised fixing points (coloured green) as a guide. (13b). Make two of these. Part 4 x2 TR-11-15 Part 4 S T E P 1 4 Attach TR-11-15 to A, then place 2x Part 4 on top.
  • Page 14 Assembling the Right-side Wheels TR-11-92 Part 3 S T E P 1 5 Place 2x TR-11-92 on top, then attach two more Part 3 wheels. TR-11-21 TR-11-88 TR-11-21 PWB 2.6x8 S T E P 1 6 Secure the wheels using 2x TR-11-88 threaded onto 2x PWB 2.6x8 mm screws. Glue 2x TR-11-21 and place them over the screws.
  • Page 15 Assembling the Spine TR-11-25 TR-11-27 TR-11-26 S T E P 1 S T E P 2 Attach TR-11-25 to TR-11-27..then attach TR-11-26... S T E P 3 Check all the holes are aligned before pushing TR-11-77 through the middle to secure everything TR-11-77 together.
  • Page 16 Assembling the Spine S T E P 5 Take 2x the Part 5 pieces and connect them together as shown. Part 5 Part 5 S T E P 6 Push TR-11-77 through the joint to secure them together. TR-11-77 S T E P 7 Connect another 4x Part 5 pieces to make a chain of 6x Part 5 which now...
  • Page 17 Assembling the Spine TR-11-26 TR-11-28 S T E P 8 Take TR-11-28 and TR-11-26 and connect them together as shown. TR-11-77 S T E P 9 Push TR-11-77 through the joint to secure them together. Part 7 AGORAMODELS OPTIMUS PRIME...
  • Page 18 Assembling the Spine TR-11-25 TR-11-23 S T E P 1 0 Take TR-11-25 and TR-11-23 and connect them together as shown. TR-11-78* S T E P 1 1 Push TR-11-78 through the joint to secure them together. *Note - use TR-11-78 (not TR-11-77). Part 8 AGORAMODELS OPTIMUS PRIME...
  • Page 19 Assembling the Spine S T E P 1 2 Part 7 Part 6 Part 8 Connect Part 7 and Part 8 to the ends of Part 6 and secure them with TR-11-77. TR-11-77 Part 9 S T E P 1 3 Part 9 Connect TR-11-24 to Part 9, securing each part...
  • Page 20 Assembling the Spine S T E P 1 4 Connect another 3x parts TR-11-24 in the PB 2.3x6 same way. TR-11-24 S T E P 1 5 PB 2.3x6 Then connect the remaining 3x TR-11-24 parts. TR-11-24 AGORAMODELS OPTIMUS PRIME...
  • Page 21 Assembling the Spine S T E P 1 5 c o n t . . . The spine is now complete with 8x connected sections. Part 10 TR-11-29 S T E P 1 6 TR-11-86 Position TR-11-29 onto A paying close attention M 3x8 to the orientation shown in 16a.
  • Page 22 Assembling the Spine PB 2.6x8 TR-11-30 TR-11-31 Part 11 TR-11-32 S T E P 1 7 Attach TR-11-30 and TR-11-31 to TR-11-32 and secure them using 4x PB 2.6x8 mm screws. S T E P 1 8 PB 2.3x6 Attach Part 10 to Part 11, securing them with 2x PB 2.3x6 mm screws.
  • Page 23 Assembling the Spine S T E P 2 0 Thread 4x TR-11-86 onto 4x M 3x8 mm screws and M 3x8 use them to fix B in place. TR-11-86 S T E P 2 1 Take 2x TR-11-75 and place them as shown.

  • Page 24: Assembling The Body

    Assembling the Body TR-11-34 TR-11-37 TR-11-33 Part 12 PB 2.6x8 S T E P 1 Take TR-11-33 and attach TR-11-34, then TR-11-37, and fix them together with 5x PB 2.6x8mm screws. S T E P 2 Part 12 Place Part 12 onto the brackets on A as shown.
  • Page 25 Assembling the Body S T E P 4 Secure them in place with 4x PB 2.6x8 mm screws. PB 2.6x8 S T E P 5 Continue to secure the parts together using 4x PM 3x8 mm screws. PM 3x8 AGORAMODELS OPTIMUS PRIME...
  • Page 26 Assembling the Body TR-11-39 TR-11-38 TR-11-75 S T E P 6 Attach TR-11-38 and TR-11-39, then 2x TR-11-75 to A. TR-11-42 TR-11-43 S T E P 7 Gently bend the cables and position them in the orientation shown, fitting underneath parts TR-11-42 and TR-11-43 (also see 7a and step 8 for guidance).
  • Page 27 Assembling the Body M 3x8 TR-11-86 TR-11-79 S T E P 8 Fit TR-11-79 into the rectangular recess, then secure in place using 4x TR-11-86 threaded onto 4x M 3x8 mm screws. TR-11-51 M 3x8 TR-11-87 S T E P 9 Fit TR-11-51 to A in the orientation shown.
  • Page 28 Assembling the Body S T E P 1 0 Attach TR-11-44 to TR-11-40 using 4x PWM 2x6 mm screws. TR-11-40 TR-11-44 PWM 2x6 Part 13 S T E P 1 1 Attach TR-11-45 to TR-11-41 using 4x PWM 2x6 mm screws. TR-11-41 TR-11-45 PWM 2x6...
  • Page 29 Assembling the Body Part 13 Part 14 S T E P 1 2 Attach Parts 13 and 14 to A. Note: Match the number ‘1’ and ‘2’ marked on the inside of Parts 13 and 14 to the corresponding number (circled) on the side of the body. PWB 2.6x6 S T E P 1 3 Secure parts in place using 2x PWB 2.6x6 mm screws.
  • Page 30 Assembling the Body S T E P 1 4 Attach TR-11-52 and TR-11-53 to A, PM 3x8 securing them with 6x PM 3x8 mm screws. TR-11-52 TR-11-53 S T E P 1 5 Attach TR-11-54 to A, PM 3x8 feeding the cables through the hole in the middle.
  • Page 31 Assembling the Body S T E P 1 6 TR-11-46 Take 4x TR-11-47, apply a little glue (16a), and push into place on TR-11-46. TR-11-47 Part 15 S T E P 1 7 TR-1-49 TR-11-48 Place TR-11-91 onto TR-11-48, then place TR-11-49 and TR-11-50 on top.
  • Page 32 Assembling the Body S T E P 1 9 Push Part 16 over the top. Part 16 S T E P 2 0 PWB 2.3x6 Attach TR-11-55 to A. Secure with 2x PB 2.3x6 PB 2.3x6 mm screws in the outer holes and 2x PWB 2.3x6 mm screws TR-11-55 in the inner holes.
  • Page 33 Assembling the Body S T A G E C O M P L E T E AGORAMODELS OPTIMUS PRIME...
  • Page 34 Assembling the Remote Control for Lights and Voice TR-11-13 TR-11-09 PB 2.3x6 S T E P 1 Place the circuit board TR-11-13 into the remote control TR-11-09. Insert the terminal into the socket as shown in 1a. Secure in position with 3x PB 2.3x6 mm screws. TR-11-08 TR-11-11 TR-11-12...
  • Page 35 Assembling the Remote Control for Lights and Voice TR-11-10 S T E P 4 Insert 2x AAA batteries into the battery compartment, then slide the battery compartment lid TR-11-10 into place. Please note: batteries are not supplied with your model. P A C K C O M P L E T E AGORAMODELS OPTIMUS PRIME...