Installation; Before The Assembly - Veratron VMH 35-D User Manual

INSTALLATION

Before starting work, disconnect the ground terminal of the battery to avoid the risk of a short circuit. If the
vehicle is equipped with additional batteries, the negative terminal of all batteries must also be
disconnected if necessary. Short circuits can burn cables, explode batteries and cause damage to other
electronic systems. Remember that by disconnecting the battery, all data entered in the temporary
electronic memory will be lost and will have to be reprogrammed

BEFORE THE ASSEMBLY

1. Before starting work, switch off the ignition and
remove the ignition key.
If necessary, remove the main power switch.
2. Disconnect the negative terminal of the battery.
Do not allow the battery to be reconnected by
mistake.
3. When mounting the device in the vicinity of a
magnetic compass, maintain a protective
distance from the compass.
6
.
INSTALLATION
VMH 35-D