Setup Menu; Engine Identification; Select A J1939 Source - Veratron VMH 35-D User Manual

SETUP MENU

Setting
Engine Nr.
Reset Trip
Reset Distance
Reset Fuel
Consumption

ENGINE IDENTIFICATION

The designation selected in the SETUP > Engine No. menu determines which engine data is to be displayed
if more than one engine is present.
Example: In a configuration with two engines and two VMH 35 displays (one for each engine), one
instrument should be set as Engine 1 and the second as Engine 2.
This setting does not affect the battery, fuel level or GPS data.
This setting also determines the designation used to transmit engine data from the VMH 35 display to the
NMEA 2000 and EasyLink networks.

SELECT A J1939 SOURCE

Select which instance of engine information from the SAE J1939 network should be displayed on the VMH
35 screen in the menu Setup > J1939 Src.
For simple CAN bus networks with only one engine this can be left at the default value "Auto".
18
Description
Identification number of the engine whose data
should be displayed on the gauge
Partial hour counter reset (Trip).
Partial distance counter reset (Trip).
Reset the fuel consumption counter
GENERAL SETTINGS
Possible Values /
Commands
1 – 4
Yes / No
Yes / No
Yes / No
VMH 35-D