Table of Contents
Advertisement
ELECTRICAL CONNECTIONS
DAY / NIGHT MODE SWITCH (S1)
The display allows you to set two display illumination levels for day and night.
It is possible to switch from day mode to night mode (and vice versa) by means of a switch external to the
display (S1) connected to the power supply or by connecting to the lights signal onboard KL.58, if present.
CONNECTION TO THE NMEA 2000® NETWORK
Once the installation is complete, you can interface the device to the NMEA 2000® network through the
dedicated socket.
Be sure to tighten the M12 connector by screwing it onto its counterpart in order to preserve its
watertightness.
An accessory drop cable is required. (Not included)
Note that NMEA 2000® does not allow drop cables longer than 6 meters.
Refer to the NMEA 2000® standard for proper network design.
10
VMH 35-D
Advertisement
Table of Contents
