Table of Contents
Advertisement
ADJUST THE RPM SCALE
Adjust the layout of the RPM bar graph, by selecting the fitting maximum engine speed.
Applicable values are 3'000 or 4'000 RPM.
In order to support engines with engine speeds of up to 8'000 RPM the version VMH 35 (B00085501) or
VMH 35-S (B00143501) is required.
RESET A TRIP VALUE
•
Press the MODE button until the DISPLAY menu appears.
•
Briefly press the MODE and/or SET button to scroll through the pages to the one of interest.
•
Press the MODE button until the page detail appears.
•
Press and hold the SET button until the value resets.
UPLOAD A CUSTOM SPLASH LOGO
A custom splash logo can be loaded from a PC using the Veratron Configuration Tool.
This logo will then be displayed each time during the startup sequence of the device.
For more information, please refer to the Veratron Configuration Tool user manual or contact your Veratron
reseller.
19
GENERAL SETTINGS
VMH 35-D
Advertisement
Table of Contents
