UNITS
Setting
Speed
Trip
Flow
Tank
Temperatures
Pressure
Depth
Note: the underlined value/command is the default.
CLOCK
The time is only received via GNSS, it cannot be counted internally.
The clock settings can be found in the menu Display > Clock . To adapt the time to your current time zone,
choose the according value in the submenu Offset.
To switch between the 12h and 24h time format, make the selection in the submenu Format.
SELECT THE PAGES TO DISPLAY
By default, all pages are displayed.
You can choose which pages to hide/show in the menu under Display > Screens.
If you are working with the Veratron Diagnostic Tool, you can make the selection of shown and hidden
screens faster by making this setting in the Configuration Tool.
17
Description
Speed units
Unit of measurement of distance travelled
Flow measurement units
Unit of measurement for the liquid in the tank
Temperature units
Pressure units
Depth measurement units
GENERAL SETTINGS
Possible
values/commands*
km/h , mph, kts
km , mile , nm
L/h , gph
L , US gal
°C , °F
bar , PSI
m , ft
VMH 35-D