Display Menu Structure; Change The Brightness Of The Display; Set The Day/Night Mode - Veratron VMH 35-D User Manual

DISPLAY MENU STRUCTURE

CHANGE THE BRIGHTNESS OF THE DISPLAY

The change affects the set day or night mode.
•
Press the MODE button until the DISPLAY menu appears with BACKLIGHT highlighted.
•
Press the SET button to confirm the menu item.
•
Press the MODE and/or SET buttons to increase or decrease the brightness.
•
To exit the settings menu, press the SET and MODE buttons simultaneously until the previously
displayed data page appears.

SET THE DAY/NIGHT MODE

To set the desired mode, connect pin 10 of the MX150 plug to the following potential:
To set the mode...
day
night
16
Then...
move the pin switch to GND/OPEN.
move the pin switch to 12V/24V.
GENERAL SETTINGS
VMH 35-D