Table of Contents
Advertisement
4
1
4
5
8
3
2
GAS CONNECTION
The cooking hob is designed to operate with both
natural gas (methane) and liquid gas (LPG), and
can be easily converted from one type to another
following the instructions given in the relative
section of this booklet «Converting to a different
type of gas».
At factory the appliance has been pre-installed
to natural gas.
Attention! Connection to the gas supply and
converting to a different type of gas must be
carried out by qualified technicians and in
conformance with the requirements.
Depending
on
regulations, may be used different (from
mentioned) types of connections.
If the appliance is to operate with gas bottles (LPG),
a
pressure
regulator
requirements.
Rigid pipe connection
Connection to the mains gas supply may be made
via a metal pipe or via a rigid stainless steel pipe, or
via a flexible steel-tipped hose 3 which is tightly
attached to the fitting 2 (remove the plastic cap 1).
When connecting to LPG, use the fitting 4.
A service-adapter 5 is for gas service personal only.
The gas connection with this adapter is prohibited.
The fittings 4 and 5 with seals are supplied with the
appliance and comply with standards.
EN
regional
rules
conforming
to
and
the
Advertisement
Table of Contents
