Table of Contents
Advertisement
min 55
min 600
min 150
16
min 15
min 650
min 150
NSTALLATION OF THE HOBS
The
regulations
covering
maintenance and operation of gas appliances for
domestic use are applicable regulations.
This appliance is not provided with a combustion
product discharge.
Installation and connection should be made in
accordance with this regulation.
It is recommended that it be installed in sufficiently
aerated places, in terms of the laws in force.
The quantity of air which is necessary for
combustion must not be below 2,0 m³/h for each kW
of installed power (See «Nozzle table»).
The appliance can be fitted into a working area as
illustrated on the corresponding figure.
The installation space measurements are given in
mm.
Make sure that surrounding materials are heat
resistant.
Apply the seal provided over the whole of the area
perimeter.
Attention! To install the appliance is not
recommended the use of the silicone or other
sealants and other adhesives besides the
supplied mounting materials. If additional
fastening materials and substances have
been used, the removing the device from the
mounting niche in case of necessary service
is provided by and at the expense of the
owner. The manufacturer and the customer
services are not responsible for damages of
equipment and furniture because of the
disassembling.
Attention!
Installation
connection of the cooking hob must be made
by a qualified expert only.
Attention! We Inform you that our devices
which are the object of the present operating
instructions are precertain exclusively for the
domestic use.
EN
the
installation,
and
electrical
Advertisement
Table of Contents
