Full-Length Center Console - Audi A8 2016 Owner's Manual

Seats and storage
Memory buttons
Applies to: vehicles with memory funct ion
Fig.
67 Driver's door: memory func tio n buttons
The memory buttons are located in the driver's/
front passenger's door and in the rear doors*.
Switch ing the memory function on/ off
• Press the
IOFFI
button to switch the memory
function on/off. The LED in the button illumi-
nates when the memory funct ion is switched
off. Seating profiles are neither stored nor re-
called .
Storing a seating profile
• Press the
ISETI
button . When the word SET
lights up, the memory is ready to store set-
tings.
• Press a memory button briefly. A tone confirms
that the settings were stored .
Accessing a seating profile
• If the driver's door is open and the ignit ion is
switched off, press the memory button .
• If the driver's door is closed or the ignition is
switched on, press and hold the memory but-
ton until the seat adjustment is complete.
A
WARNING
- For safety reasons, the seat setting should
only be recalled when the vehicle is station-
ary - otherwise you risk having an accident.
- If necessary, you stop th e process by p ress -
ing the
IOFF I
button or any of the memory
buttons.
66
Adjusting the front passenger seat in the
MMI
Applies to : vehicles with memo ry funct ion
The driver con adjust the position of the front
passenger seat.
Adjusting the front passenger seat from the
driver's side
• Select:
I
CAR
I
function button
>
Car systems
contr ol button > Vehicle settings > Seats >
Front passenger seat> Adjust seat position.
• You can now adjust the front passenger seat
using the buttons on the driver's seat
¢page 59, fig . 59 .
Matching the position of the driver's seat
• To adjust the front passenger seat to match the
driver's seat settings, select the
I
CAR
I
function
button > Car systems control button > Vehicle
settings > Seats > Front passenger seat> Sym-
metry to driver seat.
• Press and hold the control knob unti l the ad-
justment process is complete.
@
Tips
When matching seat settings, the settings for
the lumbar support and seating surface will
not transfer to the front passenger's seat.
Full-Length center
console
Overview
Applies to: vehicles wit h full-length center console
Fig. 68 Rear: full-le ngth center console
@ ·
115 volt socket
i=>
page 67
@ ·cup holder
i=>
page 73