Table of Contents
Advertisement
@
Tips
- Even though the shape and warmth radiat-
ed by each object detected is evaluated, the
system does have limitations and it can give
incorrect warnings.
- For technical reasons, the image pauses in
split second intervals.
Switching on and off
Applies to: vehicles with night vision assistant
Fig. 122 Area around the light switch: nigh t vision assis-
tant button
"' Switch the ign ition on and turn the light switch
to the
AUTO
position or gD.
"'T o switch night vision assistant on, press the~ ,,
button
~
fig. 122.
The image from the night vi-
sion camera appears in the instr ument cluster
display.
"' Press the button~ ,, again to switch night vision
assistant off.
If conditions are bright enough, night vision as-
sistant can be switched on without moving the
light switch to the
AUTO
position . However, pe-
destrian and wild animal detection and warnings
are only active when it is dark outside and the
headlights are on.
Adjusting the contrast
Applies to: vehicles with nigh t vision assistant
"' Select:
ICARI
function button> Car systems
control button > Driver assist > Night vision
assist contrast.
When the night vision assistant is switched on
and the image is visib le in the display, you can
Night
vision
assistant
adjust the contrast in the image from min to
max.
Driver messages
Applies to : vehicles with night vision assistant
Night vision assistant: system malfunction!
The system cannot wo rk properly and is switched
off. See your authorized Audi dealer for assis-
tance .
Night vision assistant: not available
The system cannot detect properly under current
condit ions and is switched off temporarily .
Night vision assistant: only available in dark-
ness and with lights switched on
Night vision assistant only works when it is dark
outside and the headlights are on.
Night vision assistant: pedestrian detection not
available
The system has switch ed pedestrian and wild ani -
mal detection off.
111
Advertisement
Table of Contents
