Table of Contents
Advertisement
Instruments
and indicator
lights
@
Tips
- If
the data are deleted in the effic iency pro-
gram, those values are also reset in trip
computer.
- Once you have turned a fue l economy mes-
sage off, it will only appear again after you
turn the ign ition on again.
- The fuel economy messages are not dis-
played in every instance, but rather in inter-
vals over a period of t ime.
Odometer
Fig. 11
Instrument cluste r Odometer and reset button
The odometer shows you how many miles (kilo-
meters) you have driven. You can switch the dis-
play from miles to kilometers and vice versa via
the MMI.
Upper odometer
The trip odometer shows the distance driven
since it was last reset. It can be used to measure
short distances. The last dig it indicates 1/10 of a
mile (100 meters) .
You can reset the trip odometer to zero by press-
ing the Reset button ~ -
Lower odometer
The lower odometer shows the total numbe r of
miles (kilometers) driven.
Malfunction message
If there is a malfunct ion in the instrument clus-
ter, DEF w ill appear in the trip odometer display
area. Contact you r auth orized Aud i dealer to have
the prob lem corrected .
26
Time and date display
Fig. 12
Center conso le: analog clock
The date and time are shown in the instrument
cluster display ¢
page 23, fig . 4.
There is also an
analog clock in the center console <=:>
fig . 12 .
When you open the driver's door, the date and
time appear in the instrument cluster display for
30 seconds . When the ign ition is switched on,
the time is always displayed in the status line ©
regardless of the current display.
You can set the time on both clocks and the date
display in the MMI. Refer to the MMI owner's
manual for instructions .
Service interval display
The service interval display reminds you when
your next service is due .
Fig. 13
Instrument cluster : Service interva l display
The service interval display works in two stages:
- Inspection or oil change reminder: After a
specified number of miles, a message appears
in the instrument cluster display when switch-
ing the ignition on or off ¢
fig. 13 .
The remain-
ing distance or t ime is displayed briefly.
II>
Advertisement
Table of Contents
