Center Armrest - Audi A3 2008 Owner's Manual

________________________________________________ S _e _a _ ts _ a _n_ d _ s_ t_ o_ r_ a ....; g ::;. e _
__.lf
When the rear seats are not occupied, you can lower the
head restraints (park position) and obtain better rearward
vision.
Moving the head restraints to the "in-use
position"
- Grasp the sides of the head restraint with both hands.
- Move the head restraint to the uppermost position
=> fig. 99
G)
until it latches (in-use position).
Moving the head restraints to the "park
position"
- Press the release button
=>
fig. 99 @ .
- Grasp the sides of the head restraint with both hands.
- Press the head restraint down until it lies against the seat
back @ (park position) .
Removing the head restraints
- Take the screwdriver from the vehicle tool kit
=> page 294.
- Move the head restraint upward as far as it can go.
- Press the release button @ => page 104, fig. 99 and pull
the head restraint upward as far as it can go at the same
time.
- Insert the screwdriver at position @ into the recess and
pull out the head restraint at the same time.
Installing head restraints
- Push the rods for the head restraint into the guides until
they latch with an audible click.
Cont rols and equip-
ment
The height of the center head restraints is adjustable. They should
be adjusted to fit the occupant's body size. Correctly adjusted head
restraints and safety belts are an extremely effective safety feature
=>
page 155.
&
WARNING
Read and heed all WARNINGS => page 155, "Proper adjustment of
head restraints". •
Center armrest
The front center armrest can be adjusted to several posi-
tions and contains a storage bin.
Adjusting the armrest
- Push the armrest down.
:;i
;::
o!.
"'
a,
Fig. 100 Between the
front seats: armrest
folded down
- Lift the armrest slowly until it is in a comfortable posi-
tion.
Opening the storage bin
- Pull the release button => fig. 100 upward.
Vehicle care
I
I
irechnical data