Table of Contents
Advertisement
c::>
fig. 222 is located under the designated plas-
tic mount
c::>
A
in
AB:
Raising the vehicle on
page 262 <=:>
(D.
.. Align the jack so that its arm ®
c::>
fig. 222 en-
gages in the designated lifting point in the door
sill and the movable base ® lies flat on the
ground . The base ® must be vertical under the
lift ing point @ .
.,. Wind the jack up further unt il the fla t t ire
comes off the ground c::>
A
in
AB:
Raising the
vehicle on page 262.
Position the vehicle jack only under the designat-
ed lifting points on the sill <=:>page 261, fig. 219 .
There is exactly one locat ion for each wheel. The
jack must not be positioned at any other location
c::>
.&.
in
AB:
Raising the vehicle on page 262<=:> 0 .
An unstabl e surface under the jac k can cause the
vehicle to slip off the jack . Always provide a firm
base for the jack on t he ground. If necessary
place a sturdy board or similar support under the
jack. On hard, s lippery surfaces (such as tiles)
use a rubber mat or similar to prevent the jack
from slipping
c::>
.&. .
A
WARNING
-
- You or your passengers could be injured
wh ile changing a wheel if you do not follow
these safety precautions :
- Position the vehicle jack only at the desig-
nated lifting points and align the jack.
Otherw ise, the vehicle j ack could slip and
cause an injury if it does not have suffi-
cient hold on the vehicle.
- A soft or unstable surface under the jack
may cause the vehicle to slip off the jack.
Always provide a firm base for the jack on
the ground .
If
necessary, use a sturdy
board under the jack.
- On hard, sli ppery surface (such as tiles)
use a rubber mat or similar to prevent the
jack from slipp ing.
- To help prevent inju ry to yourself and your
passengers:
- Do not raise the vehicle unt il you are sure
the jack is securely engaged.
Em er gen cy a ss istanc e
- Passengers must not remain in the vehicle
when it is jacked up.
- Make sure that passengers wait in a safe
place away from the vehicle and well away
from the road and traffic.
- Make sure jack position is correct, adjust
as necessary and then continue to raise
the jack .
- Changes in temperature or load can affect
the height of the vehicle.
(D
Note
Do not lift the vehicle by the sill. Position the
vehicle jack on ly at the designated lift ing
points on the sill. Otherwise, your vehicle w ill
be damaged.
@
Tips
The vehicle jack mode switches off automati-
cally at speeds above
10
km/h.
Taking the wheel off/installing the spare
Follow these instructions step-by-step for chang-
ing the wheel .
Fig. 223
Cha nging a wheel: us ing the screwdriver handle
(with t he blade removed) to turn the bolts
Fig. 22 4 Changing a whee l: alig nment pin inside the top
hole
263
Advertisement
Table of Contents
