Raising/Lower Ing The Veh Icle; Driver Messages - Audi A8 2016 Owner's Manual

Audi drive select
Adjusting the Individual mode
You can adjust the vehicle settings to your personal preferences.
"' Se lect :
I CAR I
function button > Set individual
cont rol button. You can now adjust the individ-
ual systems.
The individual driving mode will automatically be
activated when you have finished configuring the
settings .
Systems Comfort
Engine and Transmission balanced
Air suspension
comfortable
Steering comfortable
The equipment in your vehicle will determine
which settings you can adjust. The following ta-
ble provides an overview of the characteristics of
each driving mode .
Auto Dynamic
balanced sporty
balanced sporty
balanced
sporty
Dynamic steering* comfortable/ind i rec1t balanced/di rect sporty/direct
Sport differential * balanced agile sporty
Adaptive cruise control* comfortable balanced
sporty
Engine sound* subtle subtle/sportya l sporty
•>
Subtle in t he dri ving posit ion D and spor ty in th e d riving positi on S
(D
Tips
Your individual mode sett ings are automati-
cally stored and assig ne d to the remote con-
trol key be ing used.
Raising/lowering the
vehicle
Raising the vehicle
You can raise you r vehicle temporarily, for exam-
p le to drive over a tall curb .
"' Se lect the following in the MMI:
ICARI
funct ion
button> Raise control button.
"'Wa it for the arrows in the display to stop blink-
ing and the vehicle t o reach its fina l position.
Lowering the vehicle
"'T o lower the vehicle, select the following in the
MMI:
ICARI
function button > Lower control
button.
"' Wait for the arrows in the display to stop blink-
ing and the vehicle to lower completely.
108
(D
Note
- Remember that your vehicle is not suitable
for driving offroad even when it is ra ised .
There is not enough ground clearance.
- If the vehicle is raised, it w ill lower auto-
matically when driving 62 mph (100 km/h)
or faster.
Driver messages
Air suspension: vehicle currently too low. Level
control running
Air suspension: vehicle currently too high. Level
control running
The driver message switches off when the level
control process is complete.