Ptfe Grease Specification; Basic Circuit For Cylinder Operation - SMC Networks C G1 N-Z Series Operation Manual

4-2. PTFE Grease Specification

Standard models -X446
Grease pack part number: GR-F-005(5g)
Lubrication
！
Caution
1) Lubrication for products using special grease
Lubrication to this cylinder leads to operation failure.
If grease other than those specified is used, it may cause the operating failure.
2) Do not wipe off the grease on the sliding surface of the air cylinder.
If grease applied to the sliding surface is forcibly removed, operation failure can result.
The color of the sliding surface of the cylinder may become black if cylinder travels for long
distance. In this case, the life can be lengthened by wiping off the grease and apply new
grease.
(Use water to wipe off the grease. Alcohol or special solvent may damage the seal.)

5. Basic Circuit for Cylinder Operation

The basic circuit for operating the product with air filter, regulator, solenoid valve and speed
controller (meter-out) is shown in the following figure.
Solenoid valve
Regulator
Air Cylinder
Fig. 11 Basic Circuit
－28－
Speed controller
Air source
Air filter