2-4. Environment
!
W a r n i n g
Do not use in environments where there is a danger of corrosion.
Install a cover over the rod if it is used in an area that is dusty, or in an
environment in which water or oil splashes on the cylinder.
Avoid storing the product in humid conditions.
Store the product with the piston rod retracted and avoid humidity, in order to prevent
generation of rust.
!
C a u t i o n
Preparation before piping
Before piping, perform air blow (flushing) or cleaning to remove any cutting chips, cutting oil,
dust, etc. from the piping and fitting.
Wrapping of sealant tape
When screwing piping or fittings into ports, ensure that chips from the pipe threads or sealing
material do not enter the piping.
Also, if sealant tape is used, leave 1.5 to 2 thread ridges exposed at the end of the threads.
Leave 2 threads exposed.
Fig. 2 Sealant tape
Wrap this way.
Sealant tape
-9-