Installing/Removing The Walker Holder; Using The Walker Holder - Invacare HMV 300 Owner's Operator And Maintenance Manual

INSTALLING/REMOVING THE WALKER HOLDER

NOTE: Reverse this procedure to remove the walker holder.
NOTE: For this procedure, refer to FIGURE 14.4.
1. If necessary, loosen but do not remove
the mounting knob.
2. Install the walker holder into the
accessory tube.
3. Thread the mounting knob into the
welded nut on the accessory tube.
Securely tighten.

USING THE WALKER HOLDER

NOTE: For this procedure, refer to FIGURE 14.5.
1. Fold walker. Refer to walker
instructions.
NOTE: Walker MUST be folded before using
walker holder.
2. Hang folded walker on walker holder
hooks.
3. Secure walker with hook and loop
straps.
Part No. 1118395
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 14—SCOOTER ACCESSORIES
Mounting
Knob
FIGURE 14.4 - INSTALLING/
REMOVING THE WALKER HOLDER
Hook and
Loop Strap
FIGURE 14.5 - USING THE WALKER
HOLDER
67
Seat
Accessory
Tube
Walker Holder
Hook
300 and 400