Removing/Installing The Caster Assemblies; Removing; Installing - Invacare HMV 300 Owner's Operator And Maintenance Manual

SECTION 11—WHEELS AND CASTERS
REMOVING/INSTALLING THE CASTER
ASSEMBLIES
NOTE: For this procedure, refer to FIGURE 11.3.

REMOVING

1. Apply a wrench to the hex nut on the caster assembly.
2. Turn the hex nut COUNTER-CLOCKWISE to loosen and remove the caster wheel.
3. If necessary, repeat STEPS 1-2 to remove the other caster.

INSTALLING

1. Insert the new caster wheel into the caster housing and turn the hex nut CLOCKWISE
to securely tighten the caster wheel in place.
Caster Housing
Swingarm Assembly
Hex Nut
Caster
FIGURE 11.3 - REMOVING/INSTALLING THE CASTER ASSEMBLIES
48
300 and 400 Part No. 1118395
Download from Www.Somanuals.com. All Manuals Search And Download.