Invacare HMV 300 Owner's Operator And Maintenance Manual page 52

SECTION 12—BATTERIES
7. Connect the RED and BLACK battery connector to the wiring harness assembly.
Tighten securely.
8. Secure batteries in the battery tray using the battery strap (Detail "A" of FIGURE 12.2).
9. Reinstall the rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.
10. Reinstall the seat. Refer to Removing/Installing the Seat on page 34.
NOTE: New batteries MUST be fully charged BEFORE using, otherwise the life of the batteries
will be reduced.
11. If necessary, charge the batteries. Refer to Charging the Batteries on page 58.
DETAIL "A" - REMOVING/INSTALLING THE BATTERIES
Batteries
Batteries
Battery Tray
Battery
Removed
Installed
Strap
Battery
Tray
NOTE: Seat and Rear Shroud not shown for clarity.
DETAIL "B" - BATTERY WIRING HARNESS
RED and BLACK
Battery Connector
50Amp Fuse
RIGHT
WHITE Battery
LEFT
POSITIVE (+) RED
BATTERY
BATTERY
Cable (Jumper)
Battery Cable
NEGATIVE (-) BLACK
Battery Cable
POSITIVE (+) RED
NEGATIVE (-) BLACK
Battery Terminal
Battery Terminal
POSITIVE (+) RED
NEGATIVE (-) BLACK
Battery Terminal
Battery Terminal
FIGURE 12.2 - REMOVING/INSTALLING THE BATTERIES ON 300
52
300 and 400 Part No. 1118395
Download from Www.Somanuals.com. All Manuals Search And Download.