Resetting The Circuit Breaker - Invacare HMV 300 Owner's Operator And Maintenance Manual

SECTION 6—OPERATION OF THE POWERED SCOOTER
Controller Tray
Transaxle
NOTE: Brake Release Lever
on 300 shown. Brake
Release Lever on 400
operates the same way.

RESETTING THE CIRCUIT BREAKER

NEVER defeat or bypass the circuit breaker. ONLY replace with a circuit breaker of
the same rating.
NOTE: Key must be removed from ignition before resetting circuit breaker.
NOTE: For this procedure, refer to FIGURE 6.4.
1. Remove seat. Refer to Removing/Installing the Seat on page 34.
2. Remove rear shroud. Refer to Removing/Installing the Rear Shroud on page 44.
3. To reset, press circuit breaker button located on the controller tray.
4. Reverse STEPS 1 and 2 to reassemble the powered scooter.
DETAIL "A" - 300
FIGURE 6.4 - RESETTING THE CIRCUIT BREAKER
300 and 400
Download from Www.Somanuals.com. All Manuals Search And Download.
FIGURE 6.3 - BRAKE RELEASE LEVER
WARNING
Circuit
Breaker
Button
Controller Tray
32
ENGAGED
(PUSH LEVER IN)
Brake Release Lever
DETAIL "B" - 400
DISENGAGED
(PULL LEVER
OUT)
Circuit
Breaker
Button
Controller Tray
Part No. 1118395