Advertisement
Quick Links
Trademarks
Copyright © PLANET Technology Corp. 2002.
Contents subject to revise without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
FCC Warning
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE-mark Warning
This is a Class A product. In a domestic environment, this product
may cause radio interference, in which case the user may be re-
quired to take adequate measures.
Revision
PLANET Internet Telephony Gateway Family
QUICK INSTALLATION GUIDE
For model: VIP-000, VIP-200, VIP-400,VIP-400FS, VIP-400FO
Part No.: EMQ-VIPV6
Advertisement
Related Manuals for Planet VIP-000
Summary of Contents for Planet VIP-000
- Page 1 Trademarks Copyright © PLANET Technology Corp. 2002. Contents subject to revise without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
-
Page 2: Table Of Contents
4.2 VIP VIP ................... 22 4.3 VIP VIP (D ) ........26 YNAMIC ENVIRONMENT 4.4 C PLANET VIP..............29 ALL TO 4.5 C ..........30 ONNECT TO AND ITS ISSUES 4.5.1 CP Tone Detection .............. 30 4.5.2 Call Security ................ 30 CHAPTER 5 QUICK REFERENCE IN CD-ROM GUIDE..... -
Page 4: Chapter 1 About This Guide
CHAPTER 1 ABOUT THIS GUIDE Thank you for purchasing PLANET Internet Telephone Gateway, VIP-xxx, Voice over IP Gateway (ITG, in the following terms). You can now ease the cost of long distance call yet still get the voice in excellent quality. - Page 5 - 2 -...
-
Page 6: Chapter 2 Network Configuration
CHAPTER 2 NETWORK CONFIGURATION This chapter shows you how to configure the VIP (Internet Telephony Gateway) to your network and/or Internet. We divide into two sections, through console interface and through Web Interface. 2.1 Console Interface & Commands 2.1.1 Start up You can direct connect the RS-232 cable in the package to your PC’s COM port and the other end to VIP. -
Page 7: The Basic Command About Networking
2.1.2 The Basic command about networking Under the VIP prompt, you can direct key in “net”. Your VIP will show you command. the available command and information about the The command we will used here are: 1) ITG>net set ip 2) ITG>net set gateway 3) ITG>net set mask 4) ITG>net show... - Page 8 The command “net set ip” is used to set the IP address of VIP. If you would like to set up the IP address to “192.168.0.1”, for exam- ple. You can have the command as below and press the <enter> key: ITG>net set ip 192.168.0.1<enter>...
-
Page 9: After The Network Setup
In the following section, we will show you how to set up and use Hint domain name ping like “ping vip.planet.com.tw” If both commands all get the message “device is alive”, this means the VIP is well connected to the network and also to the Internet. - Page 10 Then shows the main screen. Click on “Configure System” button on left side and then select “IP Settings” the following screen appeared. Just key in the IP, mask and gateway and ‘save the changes’. Then re-start the system to make the setting take effect. - 7 -...
- Page 11 - 8 -...
-
Page 12: Chapter 3 Basic Configuraiton
There are two type of the voice port, FXO (Foreign eXchange Office) and FXS. (Foreign eXchange Station) On the printing of the RJ-11 port, you should find that. E&M module is also available for VIP-000. Please consult the local dealer. And in this guide, we will focus on FXO and FXS. Hint... -
Page 13: The Logic Of Dial Plan
FXS port The FXS port allows the connection to an end node, like telephone, fax machine, or out-line of PBX system. FXS port is as like your local phone service provider who provides a number to you. It is easy to tell that after you have connected an end- device to FXS port and you will hear the dial-tone from... - Page 14 2) Hunt Group The “Hunt Group” here is an interpreter between phone number and Destination ID. VIP phone table will base on the number you dialed to find the related hunt group. So, different numbers can map to the same hunt group.
-
Page 15: Console Configuration & Commands
Destination ID Destination ‘1’ è ‘0’ è ‘10’ ‘vip.planet.com.tw’ A H.323 VoIP gateway with a fixed IP or a fixed host name. In this guide, we will use a dial table as like below: Number Hunt Group Dest. ID Destination Hint 192.168.0.2... -
Page 16: Atpm' Command
3.2.1 ‘atpm’ command For the first time setup, you can direct use command list to check all your current tables. 1) ITG>atpm alist ; show you the address table 2) ITG>atpm hlist ; show you the hunt group table 3) ITG>atpm dlist ; show you the destination table 1) ITG>atpm alist After key in the command ‘atpm alist’... - Page 17 H.323 device addressed with an IP. . Dest. ID Mode Destination H.323 192.168.0.2 vip.planet.com.tw The above example shows two type of H.323 remote device. This could be a fixed IP address or a host name. - 14 -...
- Page 18 Now, let’s add some phone numbers to VIP. The commands we will used are: 4) ITG>atpm req : request for database update 5) ITG>atpm aadd: add a new phone 6) ITG>atpm hadd; add a new Hunt Group ID 7) ITG>atpm dadd; add a new Destination ID 8) ITG>atpm done;...
-
Page 19: Show' Command
The parameter H323 here is to tell the VIP the destination is a H.323 gateway. If you know its host name, you can either use like: ITG>atpm dadd 11 dns vip.planet.com.tw <enter> To enable a domain name call, DNS server in H323 is a MUST-HAVE parameter. -
Page 20: Set' Command
The name of the VIP for it to connect with GateKeeper GK mode To enable connection with GateKeeper or not. If you are going to setup your VIP to work with another PLANET VIP. It is strongly recommended to use those default value. Those should offer Hint the optimal voice quality. -
Page 21: Dynamic Ip Configuration Related Commands
However, to help your VIP work with DNS server, you will need to use the command. ITG>set h323 dns_ip 168.95.192.1 dns.hinet.net <enter> The IP address ‘168.95.192.1’ is an IP address of your local DNS server, please consult your network administrator or ISP for the information. And the host name ‘dns.hinet.net’... - Page 22 3) DDNS service net set dyndns on --- turn on the DDNS client net set dyndns off --- turn off the DDNS client set dyndns add [serv_name] [host_name] [user_name] [password] add the DDNS name applied from DynDNS.org set dyndns delete [host_name]|all --- delete the DDNS name applied from www.DynDNS.org net show dyndns...
- Page 23 - 20 -...
-
Page 24: Chapter 4 Configuraiton Examples
CHAPTER 4 CONFIGURAITON EXAMPLES 4.1 The default dial-plans Without any configuration, your VIP is come with following basic informa- tion. Network: : 192.168.0.1 Mask: : 255.255.255.0 Gateway : 0.0.0.0 Dial Plan: Hunt Group Dest. ID Dest. 0 (local port #1) 1 (local port #2) (x-1) (X, from 2 to 8, varies with... -
Page 25: Vip To Vip
Pick up your extension handset, for example, 505 and dial ‘’301. After one ring, you should hear a dial tone. Please press ‘203’ then the telephone connects to the VIP’s FXS port should ring. If you fail to hear the dial tone, please check line impedance of your PBX. - Page 26 Step3. VIP A: ITG>ping 192.168.0.2 ; ping to VIP B Ping (192.168.0.2) 56 data byte 192.168.0.2 is alive VIP B: ITG>ping 192.168.0.1 ; ping to VIP A Ping (192.168.0.1) 56 data byte 192.168.0.1 is alive After the three steps, this means both VIP can find each other. Now let’s setup a remote H.323 gateway to each other.
- Page 27 Now, once VIP A get a dialed number “02” it will direct to VIP B. The same to VIP B, ‘01’ will map to VIP A without doubt. VIP A VIP B Assume both VIPs have a FXS port in port#3 connect to a phone. To call each others.
- Page 28 Together with PBX, we use the configuration mentioned in section 4.1 VIP A: The users in ext. 505 want to call to VIP B, 203. What we need is pick up the 505’s handset and dial ‘301’. After you hear the dial tone again, just dial ’02-203’.
-
Page 29: Vip To Vip (Dynamic Ip Environment)
First of all, it is required to apply a DDNS name from http://www.dyndns.org respectively for VIPs on site A and site B. (For ex- ample, the names are planetvip.dyndns.org for VIP on site A, and planet- vip2.dyndns.org for VIP on site B.) planetvip.dyndns.org is applied for VIP on site A, planetvip2.dyndns.org is applied for VIP on site B. - Page 30 VIP B VIP A VIP configuration (ADSL PPPoE connection) on site A: PPPoE section: net set pppoe on Please fill in user- name/password ob- net set pppoe user_name [my_name] tained from ISP. net set pppoe pw [my_password] net reset - 27 -...
- Page 31 DNS server section: DNS server settings will set h323 dns_ip 168.95.192.1 not take effect till sys- config activate tem reboot config store DDNS client section: set dyndns add dyndns planetvip planetvip planetvip 123 config store Dialplan settings: atpm req atpm aadd 66 2 8 66 2 Create an address entry atpm hadd 66 2 66 for VIP on site B...
-
Page 32: Call To Planet Vip
After these commands, please insert command: ping “vip.planet.com.tw” to see whether you can reach us or not. The commands above will create a new Destination to PLANET using DNS. Then add a phone number 119 (and strip the first 2 digits, since PLANET’s entry number is ‘9’). -
Page 33: Connect To Pbx And Its Issues
Tone. The PBX can not understand the Tone from VIP so, it still think the line is on and never hang up. Once this happened, please find a document form PLANET FTP site to fix the problem. The server is: ftp://ftp.planet.com... -
Page 34: Chapter 5 Quick Reference In Cd-Rom Guide
CHAPTER 5 QUICK REFERENCE IN CD-ROM GUIDE This guide is used to help you startup your VIP settings. It is also recom- mended to check the CD-ROM manual for more details like the “Console Command”, “Web Setup”, and how to set the device back to default value. The followings show you where you can find the information from CD- ROM. -
Page 35: Firmware Upgrade
5.3 Firmware Upgrade To upgrade the firmware, you can refer to PLAENT Web site for the latest firmware and also the latest bulletins. They can be found in the following directory: ftp://ftp.planet.com.tw/voip/firmware - 32 -... - Page 36 EMQ-VIPV6...
Need help?
Do you have a question about the VIP-000 and is the answer not in the manual?
Questions and answers