Supermicro SuperBlade SBI-6429P-C3N User Manual page 84

SBI-6429P-C3N SuperBlade Module User's Manual
Menu Option
Change SMBIOS
Event Log Settings
SMBIOS Event
Log
Erase Event Log
When Log is Full
Log System Boot
Event
MECI
METW
Log OEM Codes
Convert OEM
Codes
View SMBIOS
Event Log
Table 5-15. Event Logs Menu
Description
This sub-menu allows you to change the SMBIOS Event Log configuration
settings.
Change this setting to enable or disable all features of the SMBIOS
Event Logging during system boot. The options are Enabled and
Disabled.
If No is selected, data stored in the event log will not be erased. Select Yes, Next
Reset, data in the event log will be erased upon next system reboot. Select Yes,
Every Reset, data in the event log will be erased upon every system reboot. The
options are No, Yes, Next reset, and Yes, Every reset.
Select Erase Immediately for all messages to be automatically erased from the
event log when the event log memory is full. The options are Do Nothing and
Erase Immediately.
This option toggles the System Boot Event logging to enabled or disabled. The
options are Disabled and Enabled.
The Multiple Event Count Increment (MECI) counter counts the number of
occurrences that a duplicate event must happen before the MECI counter is
incremented. This is a numeric value. The default value is 1.
The Multiple Event Time Window (METW) defines number of minutes must pass
between duplicate log events before MECI is incremented. This is in minutes,
from 0 to 99. The default value is 60.
Use this setting to Enable or Disable the logging of EFI Status codes as OEM
codes (if not already converted to legacy).
Use this setting to Enable or Disable the converting of EFI Status Codes to
Standard SMBIOS types (not all may be translated).
This section displays the contents of the SMBIOS Event Log. It provides a date,
time, error code and severity with a brief description of each event.
5-20