Table of Contents
Advertisement
Table 5-9. PCIe/PCI/PnP Configuration Sub-menu (Continued)
Menu Option
Network Stack
Configuration
Network Stack
Ipv4 PXE Support
Ipv4 HTTP Support
Ipv6 PXE Support
Ipv6 HTTP Support
PXE Boot Wait Time
Media Detect Count
Description
Use this submenu to configure network stack settings.
This setting allows you to Enable or Disable UEFI Network Stack for your
system. If disabled, the boot option for UEFI Network Stack will not be
created.
This setting allows you to Enable or Disable Ipv4 PXE support for your
system. If disabled, the boot option for Ipv4 PXE Support will not be
created.
This setting allows you to Enable or Disable Ipv4 HTTP support for your
system. If disabled, the boot option for Ipv4 HTTP Support will not be
created.
This setting allows you to Enable or Disable Ipv6 PXE Support for your
system. If disabled, the boot option for Ipv4 PXE Support will not be
created.
This setting allows you to Enable or Disable Ipv6 HTTP Support for your
system. If disabled, the boot option for Ipv6 HTTP Support will not be
created.
This sets the wait time in seconds for you to press the ESC key tin order o
abort the PXE boot for your system. Default is 0, use your system's
keyboard's keypad to specify the number.
This sets the number of times the presence of media will be checked for
your system. Default is 1, use your system's keyboard's keypad to specify
the number.
5-15
Chapter 5: BIOS
Advertisement
Table of Contents
