Table of Contents
Advertisement
SBI-6429P-C3N SuperBlade Module User's Manual
5-2
BIOS Updates
It may be necessary to update the BIOS used in the blade modules on occasion.
However, it is recommended that you not update BIOS if you are not experiencing
problems with a blade module.
Updated BIOS files are located on our
superblade/). Please check the current BIOS revision and make sure it is newer than
your current BIOS before downloading.
5-3
Running Setup
Note: Default settings are in bold text unless otherwise noted.
The BIOS setup options described in this section are selected by choosing the
appropriate text from the M
section, although the screen display is often all you need to understand how to set the
options.
When you first power on the computer, the BIOS is immediately activated.
While the BIOS is in control, the Setup program can be activated in one of two ways:
1. By pressing <D
2. When the message Press the <Delete> key to enter Setup appears briefly at the
bottom of the screen during the POST, press the <D
S
menu:
ETUP
BIOS S
AIN
ETUP
> immediately after turning the system on, or
ELETE
website(www.supermicro.com/products/
screen. All displayed text is described in this
ELETE
5-2
> key to activate the main
Advertisement
Table of Contents
