Supermicro SuperBlade SBI-6429P-C3N User Manual page 74

SBI-6429P-C3N SuperBlade Module User's Manual
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option
Static Virtual
Lockstep Mode
Mirror Mode
Memory Rank
Sparing
Correctable Error
Threshold
SDDC
ADDDC Sparing This value Enables or Disables ADDDC Sparing for your system.
Patrol Scrub
Patrol Scrub
Interval
IIO Configuration
EV DFX Features
CPU1
Configuration
IOU0 (IIO PCIe
Br1)
IOU1 (IIO PCIe
Br2)
IOU2 (IIO PCIe
Br3)
MCP0 (IIO PCIe
Br4)
MCP1 (IIO PCIe
Br5)
Socket 0
PcieBr0D00F0 -
Port 0/DMI
Submenu
Link Speed
PCI-E Port
Max Payload
Size
Description
Use this setting to Enable or Disable Static Virtual Lockstep mode.
Mirror Mode will set the entire 1LM/2LM memory in the system to be
mirrored, consequently reducing the memory capacity by half. Options
include Disable, Mirror Mode 1LM and Mirror Mode 2LM.
Note: Mirror Enable will disable XPT Prrefetch.
This setting will Enable or Disable Memory Rank Sparing for your system.
Use this setting to set a threshold value from 1 ~32767 for the Correctable
Error Threshold used for sparing, tagging and leaky bucket. Use the + or -
keys on your numpad to toggle up or down a value or type in a number
value for the field for this setting. Default value is 10.
This value Enables or Disables SDDC for your system.
This setting Enables or Disables Patrol Scrub in your system.
This setting selects the number of hours (1-24) required to complete full
scrub. A value of 0 means auto. Default is 24. Settings are increased or
decreased using the "+" or "-" keys on your keyboard's number pad.
This sub-menu configures Integrated I/O Configuration.
This setting gives you the option to allow DFX Lock Bits to remain clear or
not. Options include Enable or Disable.
This submenu allows you to configure CPU1 configuration options.
This setting selects the PCIe port bifurcation for Br1. Options include
x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 or Auto.
This setting selects the PCIe port bifurcation for Br2. Options include
x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 or Auto.
This setting selects the PCIe port bifurcation for Br3. Options include
x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 or Auto.
This setting selects the PCIe port bifurcation for Br4. Options include x16
or Auto.
This setting selects the PCIe port bifurcation for Br5. Options include x16
or Auto.
Settings for this submenu are related to PCI Express Ports in your system.
This submenu contains a mix of static information and configurable option
settings.
This setting specifies the link speed for the PCI-E port. Options include
Auto, Gen 1 (2.5 GT/s), Gen 2 (5 GT/s) and Gen 3 (8GT/s)
This sets the max payload size. Options include 128B, 256B or Auto.
5-10