Blade Module Features; Processors - Supermicro SuperBlade SBI-6429P-C3N User Manual

SBI-6429P-C3N SuperBlade Module User's Manual
• SBM-25G-100 switch modules (up to 2)
1-3

Blade Module Features

Table 1-1 lists the main features of the SBI-6429P-C3N blade module. See the
proceeding section for components typically included in a blade system and other
optional components. Specific details for the SBI-6429P-C3N blade module are found in
Chapter 4: "Blade Module Features" on page
Table 1-1. SBI-6429P-C3N SuperBlade Module Specification Features
Mainboard

Processors

UPI Speed
Chipset
Graphics Controller
BIOS
Memory Capacity
Hard Drive Bays
Add-on Cards
System Weight
System Dimensions
Processors
The SBI-6429P-C3N SuperBlade module supports two Intel Xeon Scalable, Socket P
LGA 3647 series processors.
Refer to the Supermicro website for a complete listing of supported processors
www.supermicro.com/products/superblade). Please note that you will need to check the
detailed specifications of a particular blade module for a list of the CPUs it supports.
Details on installation of the processor into the SBI-6429P-C3N SuperBlade module are
found in Chapter 3: "Setup and Installation" on page
B11DPE (proprietary form factor)
™ ®
Dual Intel Xeon Scalable Socket P LGA3647 processors for each node.
Please refer to our website for a complete listing of supported processors.
UPI up to 10.4 GT/s
One Intel C622 chip set
Integrated Aspeed AST2500 VGA Graphics chip for each node
128 Mb SPI Flash EEPROM with AMI® BIOS for each node
Supports up to 3 TB of RDIMM/LRDIMM DDR4 2666/2400 MHz speed and 8
GB, 16 GB, 32 GB, 64 GB and 128 GB size memory in twenty-four (24) 288-pin
DIMM sockets. See https://www.supermicro.com/support/resources/memory/
X11_memory_config_guide.pdf
Includes two hot-swap 2.5" NVMe disk drives plus one hot-swap 2.5" SAS3/
SATA3 drive or three 2.5" SAS3/SATA3 drives
The SBI-6429P-C3N blade module can use optional add-on cards for a TPM
security module, Intel VROC RAID card or a Hardware RSTe key upgrade
module.
12.6 lbs (5.72 kg)
(HxWxD): 9.75 x 1.75 x 23.5" (247.65 x 44.45 x 596.9-mm)
4-1.
for details.
3-1.
1-2
(http://