The GWN7600LR Wireless Access Point provides an intuitive web GUI configuration interface for easy
management to give users access to all the configurations and options for the GWN7600LR's setup.
This section provides step-by-step instructions on how to read LED patterns, discover the GWN7600LR
and use its Web GUI interface.
LED Patterns
The panel of the GWN7600LR has different LED patterns for different activities, to help users read the
status of the GWN7600LR whether it's powered up correctly, provisioned, in upgrading process and more.
The table below describes LED patterns available on GWN7600LR.
LED Status
Indication
OFF
Unit is powered off or abnormal power supply.
Blinking green
Firmware update in progress.
Solid green
Firmware update successful.
Blanking red
Delete slave paring
Solid red
Firmware update failed.
Blinking pink
Unit not provisioned.
Solid pink
Unit not paired
Unit provisioning in progress.
Blinking blue
Solid blue
Unit is provisioned successfully.
Discover the GWN7600LR
Once the GWN7600LR is powered up and connected to the Network correctly, users can discover the
GWN7600LR using one of the below methods:
GETTING STARTED
Table 4: LED Patterns
GWN7600LR User Manual
P a g e
|
20