Gwn7600Lr Ports; Package Contents - Grandstream Networks GWN7600LR Quick Installation Manual

EN
OVERVIEW
This WiFi long range access point is designed to provide extended coverage support. Ideal
for outdoor WiFi solutions thanks to its waterproof casing and heat resistant technology.
The GWN7600LR comes equipped with dual-band 2x2:2 MU-MIMO with beam-forming
technology and a sophisticated antenna design for maximum network throughput and
extended WiFi coverage range of up to 275 meters. To ensure easy installation and
management, the GWN7600LR uses a controller-less distributed network management design
and an embeded controller within the product's web user interface. This allows each access
point to manage a network of up to 30 GWN76xx series APs independently without
needing separate controller hardware/software and without a single point-of-failure. Its easy
installation and management features packed with extra coverage support and advanced
performance features make the GWN7600LR an ideal enterprise AP for mid-size wireless
network deployments.
PRECAUTIONS
● Do not attempt to open, disassemble, or modify the device.
● Do not expose this device to temperatures outside range of -30 °C to 60 °C for operation.
● Do not expose this device to temperatures outside range of -30 °C to 60 °C for storage.
● Do not expose the GWN7600LR to environments outside of the following humidity range:
10-90% RH (non-condensing).
● Do not power cycle your GWN7600LR during system boot up or firmware upgrade. You
may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

1 x GWN7600LR Access Point
4 x Screw (PM8 x 115)
2 x Assembled Screw
4 x Locknut
1 x Cover Bracket 1 x Base Bracket
1 x Hex Key
4 x Screws and Anchors
1 x Quick Installation Guide
1 x GPL Statement
~1~

GWN7600LR PORTS

Port Description
NET/POE Ethernet RJ45 port (10/100/1000Mbps) supporting PoE.
NET Ethernet RJ45 port (10/100/1000Mbps) to your router or another
GWN76xx.
RESET
Factory reset button. Press for 7 seconds to reset factory default
settings.
POWERING AND CONNECTING THE GWN7600LR
GWN7600LR can be powered on via PoE switch using following steps:
Step 1:
Plug a RJ45 Ethernet cable into the network port of the GWN7600LR.
Step 2:
Plug the other end into the uplink port of the power over Ethernet (PoE) switch.
Network Port
~2~
RJ45 Ethernet Cable to
power over Ethernet (PoE)
Switch