Table of Contents
Advertisement
Installation -
Installation
Protective film
Mounting template
1. Secure the camera to the mounting surface using the
included screws.
NOTE:
Remove the rubber plug on the side of the
camera's base and use the gap as a cable guide
to prevent cables from getting caught between
the camera and the mounting surface.
2. Loosen the pan and tilt screw on the camera's neck
using the hexagonal wrench to adjust the camera's
view and position. Loosen the rotation screw at the
base of the camera to adjust the camera's rotation.
Panning 360°
NOTE:
When setting up the camera for the first time, use the
CALIBRATE button on the camera's web GUI to auto
calibrate the camera's lens before operation.
3. Remove the protective film from the lens cover. Softly
wipe the lens cover with lens tissue or a microfiber
cloth with ethanol to remove any dust or smudges left
from the installation process.
9
Rubber plug
Rotation 360°
Tilting 87°
Advertisement
Table of Contents
Need help?
Do you have a question about the MEGApix Ai DWC-XSTD05MF and is the answer not in the manual?