Installation -
Inserting/Removing the SD Memory Card
SD Card Slot
The memory card is an external data storage
device that has been developed to offer an
entirely new way to record and share video,
audio, and text data using digital devices.
Recommended SD card specification
(not included)
- Type: Micro SD (SD/SDHC/SDXC)
- Manufacturer: SanDisk, Samsung,
Transcend, Micron
- Capacity: Up to 1 TB / FAT32 format only.
- Class: UHS-I U3 Class 10
New micro SD card over 64GB must be
formatted on the first use.
1. Open the camera's control panel on the side of
the camera using the star wrench included with
the camera.
2. Locate the SD card slot.
3. Insert class 10 SD/SDHC/SDXC card into the SD
card slot by pressing the SD card until it clicks.
4. Press the card inward until it clicks to release from
the card slot, then remove the card.
NOTE:
Maximum SD Card size supported: Up to
1TB micro SD / FAT32.
When inserting the SD card into the card
slot, the SD card's contacts should be
facing upward, as shown in the diagram.
14
Micro
Need help?
Do you have a question about the MEGApix Ai DWC-XSTD05MF and is the answer not in the manual?