Save Function Setting - Gree GKH12K3CI Installation And Operation Manual

7.10 SAVE Function Setting

Energy Saving Function: Energy saving can make the air conditioner runs in a smaller temperature
range by setting lower limited value of setting temperature in cooling or dry mode and upper limited
value in heating mode.
Energy Saving Setting for Cooling
Under on-state and in cooling or dry mode of the unit, press Function button into energy saving
function, with SAVE blinking .Press ▲ or ▼ button to adjust lower limited value of setting temperature
in cooing mode. After that press Enter/Cancel button to turn on energy saving function for cooling.
Energy Saving Setting for Heating
Under on state and in heating mode of the unit, press Function button into energy saving function,
with SAVE blinking. Press Mode button into energy saving function for heating and then press▲ or ▼
button to adjust upper limited value of setting temperature in heating mode. After that, press
Enter/Cancel button to turn on energy saving function for heating.
After energy saving function is turned on, press Function button into energy saving function and
press Enter/cancel to cancel this function.
The energy saving setting is shown in the Fig.14.
Note:
1. In Auto running mode with save function on, the unit will be forcibly quit Auto running Mode
and change to current operation mode, After setting of save, sleep function will be canceled.
2. In save mode, if Function button is pressed or there is not any operation within 5s after the last
button operation, the system will be quit from save function setting and current data won't be
Fig.14 Energy Saving Setting
18