Function Setting - Gree GRS-CQ8.0Pd/NaEK Service Manual

When the unit is ON, the green indicating LED
on. When the unit is OFF, the green indicating LED
[Notes]
① The unit is defaulted to be OFF when energized for the first time.
② The ON/OFF key operation works only at the home page and the standby page.
③ When the "Holiday mode" or the "Emergen.mode" is activated, the ON/OFF key
operation will become ineffective.
④ When the "Forced Heating" or "Forced Cooling" is activated, it will be deactivated by
pressing the "ON/OFF" key
unit.
⑤ ON/OFF operation will be memorized by setting "On/off Memory" to be "On" at the "GEN."
setting page. That is, in case of power failure the unit will resume running upon power recovery.
Once "On/off Memory" is set to be "Off", in case of power failure the unit will keep "Off" upon
power recovery.
⑥ At the home page, the ON/OFF key
Function keys no.1 to no.4 are corresponding to "FUNC.", "PAPA", "VIEW" and "GEN." setting
pages respectively.
⑦ At the standby page, the Menu key
is used to turn on/off the unit if applicable, and all other key operations are ineffective.
⑧ The control will return automatically to the homepage where there is no any key operation in 10
consecutive minutes.

3.2.2 Function Setting

It enables the user to set each function.
[Operation Instructions]
1. At the homepage, by pressing the Function key no. 1
FUNCTION page 1, as shown in the figure below.
Unit Control
located at the upper right of the control will light
will light off.
, and then press the ON/OFF key
is intended to turn on/off the unit if applicable. The
is used to back to the homepage, the ON/OFF key
48
again to start the
, the control will access to the