Network Management Instructions; Add To Network / Remove From Network - Schlage Z-Wave J Series Manual

4.

Network Management Instructions:

4.1 Add to Network / Remove from Network

One-button Add lock to Z-Wave Network (Inclusion)
1. Place your Z-Wave Controller into the "Add" (Inclusion Mode) or "Remove"
(Exclusion Mode). Refer to the respective documentation for your home automation
system for details.
2. Remove the battery Cover
3. Press and Hold the Enrolling button under battery cover for 0.5 to 3 seconds as
shown. Solid Amber LED will be ON.
KPD (Keypad Deadbolt JBE109)
4. Release the Enrolment Button. An LED will flash amber indicating the "Add" or
"Remove" process is in progress.
5. Success is indicated by a green LED blink and a beep
If a red LED turns on, try repeating step 1-4
pg. 5
KPL (Keypad Lever JFE109)
Allegion