Oki MICROLINE 80 Maintenance Manual page 61

---------------------------------------------------------~
(6) Carriage frame (See Figs. 7-2, 7-7.)
Item
Dis-
assembly
CD
(3)
®
Description
Remove upper cover.
(See 5.5.4 (1).)
Remove print head. (See 5.5.4 (5).)
Position carriage assembly to left
side.
Remove belt clamp screw (Fig. 7-7-4),
and belt clamp (Fig. 7-7-2).
Remove right and left snap lever screws
(Fig. 7-2-10) which fasten upper
carriage shaft (Fig. 7-2-5).
Remove one snap lever (Fig. 7-2-6),
and pull carriage shaft from right
and left side plates.
Remove flat cable connector screw from
carriage frame, and remove connector
from carriage frame.
CD
Lift carriage frame up, and remove it
from lower carriage shaft.
Re- Reverse the disassembly procedure.
assembly
Adjust-
CD
Gap between platen and print head
ment
Print head
0.45-0.5 ....
Ri bbon
Snap lever
Carriage shaft
Tool
No. 2-200
Philips
screwdriver
No. 2-200
Philips
screwdriver
No. 2-200
Philips
screwdriver
Stop ring
pliers
No. 2-200
Philips
screwdriver
59