Oki MICROLINE 80 Maintenance Manual page 60

58
~---------------------------------------------------------
(5) Print head (See Fig. 7-2.)
Item
Dis-
assembly
Re-
assembly
Sketch
Description
CD
Remove the top cover by pulling it
straight up.
Disconnect the print head (Fig. 7-2-1)
connector from the carriage.
Refer to figure. l'lhile holding the
print head lock lever to the left, lift
the print head straight up.
Install the print head, reversing the above
procedure.
Note: Insert the connector lead into the
connector by twisting it clockwise
by one turn.
Carriage frame
Carriage frame
Print head
Tool