Table of Contents
Advertisement
4
~-------------------------------------------------------------
Item
Paper feed
Paper cut knife
Column indicator
Paper empty
Paper near end
Paper
Inked ribbon
Description
Friction feed, and fixed sprocket
feed with pins spaced 9 inches
apart;
Optional pin tractor unit with pins
spaced 2.5 to 9 inches apart is also
available.
Cuts paper 11/12 inch from printed
posi tion.
(Unusable if pin tractor
unit is installed)
Indicator with l/IO-inch scale
provided
Paper empty is detected at a point 2
inches from printed position, followed
by printing stoppage.
Only when roll paper is used, paper
near end is detected as roll diameter
decreases to 40 mm, and printing is
stopped.
Paper width
Roll paper:
208 to 216 mm
Sprocket paper: 9.5 inches
(When pin tractor unit is used, paper
3 to 9.5 inches wide may be used.)
Paper thickness
No. copies
necessary: Paper of 45 to 55 kg
Copies
necessary: Interleaf paper,
carbon-lined paper, no-
carbon paper of less than
45 kg; up to 3 copies,
including original;
overall thickness less
than 0.28 mm
Note: How to set sheets of copying
paper squarely: Use adhesive
spots or paper staples at both
sides.
When using adhesive
spots. be sure of uniformity
and no serious wrinkles.
(Sprocket paper)
Genuine OKI inked ribbons are
recommended.
In case of using other
inked ribbons, the following specifica-
tions must be satisfied.
Spool:
Ribbon length:
Ribbon width:
2-inch standard spool
(Underwood type)
11.5
m maximum
1/2 inch
Ribbon thickness: 0.1 mm maximum
Cloth:
Color of ink:
Eyelets:
Ink viscosity:
Nylon (40 x 40 denier
Single color
with reversing eyelets
(More than 1 mm thick
Low viscosity (SOOCP
at 25°C)
3rd Revision
Advertisement
Table of Contents
