Table of Contents
Advertisement
~----------------------------------------------------------
16
(3)
Ensure the power switch is off, and connect the a.c. cord
into t:1e outlet.
(4)
Connect the interface cable to the printer (See Fig. 3-3)
fP;:-.--::=::-H-hI---
Fuse
Connector (Female)
Connector (Mole)
Connector (jock)
~ -
Connect to input
equipment interface
Fig. 3-3
Connecting Printer to Input
Equipment Interface
(5)
Install the ribbon (See Section 3.8)
(6)
Install paper
(See Section 3.3)
Power ON/OFF
(7)
Turn the printer power on, and verify the power ,indicator
is ON.
(8)
Turn on the PRINT switch on the front of the printer.
The printer is now ready to receive data.
NOTE
If
S2 is turned "ON" on the logic board, the printer
will
execut~
self test when powered up.
When executing
self-test, it is not necessary to connect the interface
cable.
See Section 8 for details.
Advertisement
Table of Contents
